X-Ray Inspection Equipment Manufacturers

CR Technology
Don Miller, Director of Sales
714.448.0443, Fax 714.448.0445
e-mail: admin.crtech@crtechnology.com
www.crtechnology.com

• Model: CRX-80
  Footprint: 55" W x 50" D
  Throughput: Operator dependent
  X-ray Source Energy/Power: 20-80 kV, 0 to 100 microamps
  Application: Manual BGA, flip-chip and QFP solder joint inspection
  Price: <$50,000
• Model: XRV
  Footprint: 59" x 46"
  Throughput: NA
  X-ray Source Energy/Power: 50 kV, 5 watts; 20-80 kV, up to 8 watts(variable); 20-130 kV, up to 60 watts (variable)
  Application: Conveyorized, inline inspection for populated PC boards.
  Prince: $145,000

FeinFocus USA Inc.
805/520-4626
www.feinfocus.com
Data not available

Hewlett-Packard
Colin Charette, HP 5DX series product manager
970.679.3126, Fax 970.679.2653
e-mail: colin_charette@hp.com
www.hp.com/go/manufacturing

• Model: HP 5DX Series 2
  Footprint: 7.8 x 10. Ft (including electronics, cabinet and monitor cart)
  Thoughput: (with common BGA plastic packages) 50-60 joints/second
  X-ray Source Energy/Power: 160 kV@ 100 microamps
  Application: PC board solder joints
  Price: $349,000

Nicolet Imaging Systems
Doug McClure, Marketing
619.635.8609, Fax 619.695.9902
e-mail: mcclure@nicimg.com
www.nicimg.com

• Model: CSI-3600
  Footprint: 134" x 60"
  Throughput: Up to 150 joints/second
  X-ray Source Energy/Power: 125 kV@10 watts
  Application: Single-sided SMT boards for inline production inspection and process control
  Price: NA
• Model: MV-6100
  Footprint: 108" x 84"
  Throughput: 35-75 joints/second
  X-ray Source Energy/Power: NA
  Application: Double-sided SMT boards for both offline batch and inline production inspection and reporting
  Price: NA
• Model: NXR-1400iHR
  Footprint: 61.5" x 50"
  Throughput: Manual, operator dependent
  X-ray
  SourceEnergy/Power: NA
  Application: Manual x-ray inspection for both development and process control of SMT boards, devices
  and electronic packaging.
  Price: NA
• Model: NXR-20HR
  Footprint: 78" x 31"
  Throughput: Manual
  X-ray Source Energy/Power: NA
  Application: Manual inspection for both development and process control of SMT boards, etc.
  Price: NA

X-Tek
Joe Owren, General Manager
408.486.9620, Fax 408.486.9625
e-mail: xtekllc@hypersurf.com
www.xtek.co.uk

• Model VTX160
  Footprint: 58" x 35"
  Throughput (approx./hour) 100-1000
  X-ray Source Energy/Power: 160 kV@20 watts
  Application: 2mm x-ray system, particularly suited for uses requiring the finest resolution and highest magnification.
  Price: NA
• Model CPX160
  Footprint: 58" x 35"
  Throughput 100-1000
  X-ray Source Energy/Power: 160 kV@20 watts
  Application: Low-cost answer to volume batch inspection for BGAs, flip-chips and other component or PC board.
  Price: NA
• Model HMX160
  Footprint: " 95" x 50"
  Throughput 100-1000
  X-ray Source Energy/Power: 225 kV@225 watts
  Application: Inspect almost anything with the progammable 5-axis manipulator, from small components to large, heavy PC boards
  Price: NA
• Model VMX160
  Footprint: 91" x 46"
  Throughput: 100-2000
  X-ray Source Energy/Power: 160 kV@60 watts
  Application: High-volume inspection using a 5 mm x-ray source, 18" x 20" scan area
  Price: NA

* Data supplied by manufacturers.